PLC Omron CP1E kontrol Elektropneumatik

Assalamualaikum warahmatullahi wabarakatuh see friends all on this occasion we will learn how to control the system or control the Pneumatic cylinder using the Omron VLC ok let's see the wiring we will line up later here we use the usual power supply 3 emergency start and stop buttons and the indicator light there are also 2 limit switch cylinders

one valve 5/2 double solenoid there are also the PLC omron compressor and air service unit for the question that we will work on this time is the automatic forward and backward cylinder of course with control star if the star is pressed then

forward and backward automatically forward and backward automatically and the start light on then if the stop stop is pressed then the cylinder stops at the minimum stop light on and the emergency cylinder stops when the emergency light is on and it is the input output, yes, this is the input address

and output for PLC Ombron if input is 0,0 if output is 100 okay, let's just make the program using CX programmer okay, click ctrl + N to open a new page ctrl + N okay, we choose the type of PLC that we will use, that is CP1E and the CPU type is N20

Okay, the program screen is open, usually to make it easier for us to make programs, we share the step by step, like this, start stop emergency, the first is start, if start is pressed, the start light will turn on, okay, we make start for input, this is how to call the input, click C, then we enter the address 00.00 start,

for output, click O, we will enter the address, we use the internal relay for the internal relay address, namely 200.0.200.1.200.2 and so on, okay click OK then we give the name relay start, we lock it so that it continues to activate

this LED Star is to activate the lamp, the lamp Star, the address is 100.02, the lamp Star, so that it is not confused, then the lamp Star is on, yes, for the next step, that is, the automatic return

we use a formula like this, A forward and A backward use different relays, that is, relay 1 and relay 2 for A forward relay 1 for A backward relay 2 to activate relay 1, the formula is star plus sensor A0 okay, we make A forward first, A forward, yes, forward cylinder, forward cylinder, okay, so star plus sensor A0, it means relay star

relay start + sensor A0, the address is 60.003 A0, okay activate relay 1 relay 1, we lock it, okay relay 1 is active, relay 1 is for what? relay 1 is for advancing the A-maju cylinder, this is relay 1, okay solenoid advanced, the address is 100.00 okay, 100.00

the cylinder is advanced, the next step is to use the relay 2 to activate relay 2, which is relay 1 plus sensor A1 relay 1 plus sensor A1, the address is 00.04 activate relay 2, we also lock

when the relay 2 is active then we disconnect relay 1 because the cylinder will go back disconnect relay 2, yes, automatically for the forward cylinder, it won't activate again relay 2 for the cylinder goes back disconnect the cylinder goes back 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.

cylinder will go back to break this relay 2 we use the arrow 0 arrow 0 the address is 0.3 then this system will automatically move back and forth this part is ready next for the stop button stop the safety is 0.61 we activate using relay 3 stop we also turn off

for this stop, if the stop is pressed, the cylinder is minimal or the cylinder stops at a minimum, the only way is to break it here, in the relay start so that it doesn't automatically stop again, then the stop light is on, the stop light is on, the stop light is on, the stop light is on, the address is 100.03, stop, okay, it's okay, next is emergency, stop emergency,

emergency light emergency on, the emergency light is 60.02 then activate the emergency light which is 164 and the time-tested cylinder means we cut at the right angle we put the emergency light to cut here and here too and the pulsar too

0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,

the program is the way control W yes then we transfer the program by clicking control T ok yes yes ok yes ok the program has been transferred to the AC, let's just try it ok let's just operate it

what we have, the wiring that we have connected earlier, we immediately turn on the power supply first, here is the emergency button stop and start when we press start it will automatically go forward and reverse the cylinder will go forward and reverse automatically, we press start, it will go forward and reverse automatically, then we press stop, then the cylinder will stop at the minimum position and the stop light will turn on, the stop light

we press the start button again, the start on light, yes, because it will automatically go back to normal, then we press the emergency button, then it will stop for a moment where we press it, we release it, press it again, it stops for a moment and the emergency light also turns on, we release it, we stop, let's go,

That's our lesson today about the pneumatic cylinder control using PLC Omron. Thank you. Assalamualaikum warahmatullahi wabarakatuh.